Saudi Arabian SARS-CoV-2 genomes implicate a mutant Nucleocapsid protein in modulating host interactions and increased viral load in COVID-19 patients

Monitoring SARS-CoV-2 spread and evolution through genome sequencing is essential in handling the COVID-19 pandemic. The availability of patient hospital records is crucial for linking the genomic sequence information to virus function during the course of infections. Here, we sequenced 892 SARS-CoV-2 genomes collected from patients in Saudi Arabia from March to August 2020. From the assembled sequences, we estimate the SARS-CoV-2 effective population size and infection rate and outline the epidemiological dynamics of import and transmission events during this period in Saudi Arabia. We show that two consecutive mutations (R203K/G204R) in the SARS-CoV-2 nucleocapsid (N) protein are associated with higher viral loads in COVID-19 patients. Our comparative biochemical analysis reveals that the mutant N protein displays enhanced viral RNA binding and differential interaction with key host proteins. We found hyper-phosphorylation of the adjacent serine site (S206) in the mutant N protein by mass-spectrometry analysis. Furthermore, analysis of the host cell transcriptome suggests that the mutant N protein results in dysregulated interferon response genes. We provide crucial information in linking the R203K/G204R mutations in the N protein as a major modulator of host-virus interactions and increased viral load and underline the potential of the nucleocapsid protein as a drug target during infection.

Predicted structural mimicry of spike receptor-binding motifs from highly pathogenic human coronaviruses

Viruses often encode proteins that mimic host proteins in order to facilitate infection. Little work has been done to understand the potential mimicry of the SARS-CoV-2, SARS-CoV, and MERS-CoV spike proteins, particularly the receptor-binding motifs, which could be important in determining tropism of the virus. Here, we use structural bioinformatics software to characterize potential mimicry of the three coronavirus spike protein receptor-binding motifs. We utilize sequence-independent alignment tools to compare structurally known or predicted three-dimensional protein models with the receptor-binding motifs and verify potential mimicry with protein docking simulations. Both human and non-human proteins were found to be similar to all three receptor-binding motifs. Similarity to human proteins may reveal which pathways the spike protein is co-opting, while analogous non-human proteins may indicate shared host interaction partners and overlapping antibody cross-reactivity. These findings can help guide experimental efforts to further understand potential interactions between human and coronavirus proteins. HighlightsO_LIPotential coronavirus spike protein mimicry revealed by structural comparison C_LIO_LIHuman and non-human protein potential interactions with virus identified C_LIO_LIPredicted structural mimicry corroborated by protein-protein docking C_LIO_LIEpitope-based alignments may help guide vaccine efforts C_LI Graphical abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=111 SRC="FIGDIR/small/441187v1_ufig1.gif" ALT="Figure 1"> View larger version (22K): org.highwire.dtl.DTLVardef@1f09454org.highwire.dtl.DTLVardef@19a5557org.highwire.dtl.DTLVardef@158d3fdorg.highwire.dtl.DTLVardef@c59511_HPS_FORMAT_FIGEXP M_FIG C_FIG

Early Humoral Response Correlates with Disease Severity and Outcomes in COVID-19 Patients

The Coronavirus Disease 2019 (COVID-19), caused by the novel SARS-CoV-2, continues to spread globally with significantly high morbidity and mortality rates. Immunological surrogate markers, in particular antigen-specific responses, are of unquestionable value for clinical management of patients with COVID-19. Here, we investigated the kinetics of IgM, IgG against the spike (S) and nucleoproteins (N) proteins and their neutralizing capabilities in hospitalized patients with RT-PCR confirmed COVID-19 infection. Our data show that SARS-CoV-2 specific IgG, IgM and neutralizing antibodies (nAbs) were readily detectable in almost all COVID-19 patients with various clinical presentations. Notably, anti-S and -N IgG, peaked 20-40 day after disease onset, and were still detectable for at least up to 70 days, with nAbs observed during the same time period. Moreover, nAbs titers were strongly correlated with IgG antibodies. Significantly higher levels of nAbs as well as anti-S1 and N IgG and IgM antibodies were found in patients with more severe clinical presentations, patients requiring admission to intensive care units (ICU) or those with fatal outcomes. Interestingly, lower levels of antibodies, particularly anti-N IgG and IgM in the first 15 days after symptoms onset, were found in survivors and those with mild clinical presentations. Collectively, these findings provide new insights into the characteristics and kinetics of antibody responses in COVID-19 patients with different disease severity.

R3T (Rapid Research Response Team) One-step RT-qPCR kit for COVID-19 diagnostic using in-house enzymes

One-step RT-qPCR is the most widely applied method for COVID-19 diagnostics. Designing in-house one-step RT-qPCR kits is restricted by the patent-rights for the production of enzymes and the lack of information about the components of the commercial kits. Here, we provide a simple, economical, and powerful one-step RT-qPCR kit based on patent-free, specifically-tailored versions of Moloney Murine Leukemia Virus Reverse Transcriptase and Thermus aquaticus DNA polymerase termed the R3T (Rapid Research Response Team) One-step RT-qPCR. Our kit was routinely able to reliably detect as low as 10 copies of the synthetic RNAs of the SARS-CoV-2. More importantly, our kit successfully detected COVID-19 in clinical samples of broad viral titers with similar reliability and selectivity as that of the Invitrogen SuperScript III Platinum One-step RT-qPCR and TaqPath 1-Step RT-qPCR kits. Overall, our kit has shown robust performance in both of laboratory settings and the Saudi Ministry of Health-approved testing facility.

A Robust, Safe and Scalable Magnetic Nanoparticle Workflow for RNA Extraction of Pathogens from Clinical and Environmental Samples

Diagnosis and surveillance of emerging pathogens such as SARS-CoV-2 depend on nucleic acid isolation from clinical and environmental samples. Under normal circumstances, samples would be processed using commercial proprietary reagents in Biosafety 2 (BSL-2) or higher facilities. A pandemic at the scale of COVID-19 has caused a global shortage of proprietary reagents and BSL-2 laboratories to safely perform testing. Therefore, alternative solutions are urgently needed to address these challenges. We developed an open-source method called Magnetic-nanoparticle-Aided Viral RNA Isolation of Contagious Samples (MAVRICS) that is built upon reagents that are either readily available or can be synthesized in any molecular biology laboratory with basic equipment. Unlike conventional methods, MAVRICS works directly in samples inactivated in acid guanidinium thiocyanate-phenol-chloroform (e.g., TRIzol), thus allowing infectious samples to be handled safely without biocontainment facilities. Using 36 COVID-19 patient samples, 2 wastewater samples and 1 human pathogens control sample, we showed that MAVRICS rivals commercial kits in validated diagnostic tests of SARS-CoV-2, influenza viruses, and respiratory syncytial virus. MAVRICS is scalable and thus could become an enabling technology for widespread community testing and wastewater monitoring in the current and future pandemics.

Multiplex Isothermal Amplification Coupled with Nanopore Sequencing for Rapid Detection and Mutation Surveillance of SARS-CoV-2

Molecular testing and surveillance of the spread and mutation of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are critical public health measures to combat the pandemic. There is an urgent need for methods that can rapidly detect and sequence SARS-CoV-2 simultaneously. Here we describe a method for multiplex isothermal amplification of the SARS-CoV-2 genome in 20 minutes. Based on this, we developed NIRVANA (Nanopore sequencing of Isothermal Rapid Viral Amplification for Near real-time Analysis) to detect viral sequences and monitor mutations in multiple regions of SARS-CoV-2 genome for up to 96 patients at a time. NIRVANA uses a newly developed algorithm for on-the-fly data analysis during Nanopore sequencing. The whole workflow can be completed in as short as 3.5 hours, and all reactions can be done in a simple heating block. NIRVANA provides a rapid field-deployable solution of SARS-CoV-2 detection and surveillance of pandemic strains.

iSCAN: An RT-LAMP-coupled CRISPR-Cas12 module for rapid, sensitive detection of SARS-CoV-2

The COVID-19 pandemic caused by SARS-CoV-2 affects all aspects of human life. Detection platforms that are efficient, rapid, accurate, specific, sensitive, and user friendly are urgently needed to manage and control the spread of SARS-CoV-2. RT-qPCR based methods are the gold standard for SARS-CoV-2 detection. However, these methods require trained personnel, sophisticated infrastructure, and a long turnaround time, thereby limiting their usefulness. Reverse transcription-loop-mediated isothermal amplification (RT-LAMP), a one-step nucleic acid amplification method conducted at a single temperature, has been used for colorimetric virus detection. CRISPR-Cas12 and CRISPR-Cas13 systems, which possess collateral activity against ssDNA and RNA, respectively, have also been harnessed for virus detection. Here, we built an efficient, rapid, specific, sensitive, user-friendly SARS-CoV-2 detection module that combines the robust virus amplification of RT-LAMP with the specific detection ability of SARS-CoV-2 by CRISPR-Cas12. Furthermore, we combined the RT-LAMP-CRISPR-Cas12 module with lateral flow cells to enable highly efficient point-of-care SARS-CoV-2 detection. Our iSCAN SARS-CoV-2 detection module, which exhibits the critical features of a robust molecular diagnostic device, should facilitate the effective management and control of COVID-19.